The Differences Between e-Coating vs. Powder Coating
The Differences Between E-Coating vs. Powder Coating: A Manufacturing Decision-Maker’s Guide E-coating (electrocoating) uses electrical current to deposit liquid paint onto metal parts, while powder
READ MORE »
Curing and Drying Ovens How Temperature Uniformity Impacts Film Performance
When you’re making films, the ovens you use for curing and drying really matter. It’s not just about getting things dry; it’s about how the
READ MORE »
Made in Missouri How Our Fenton Facility Controls Quality from Steel to Startup
You know, it’s pretty cool to think about how things are made, especially when it’s right here in our own backyard. Our facility in Fenton,
READ MORE »
Can't Hit Your Line's Takt Time? A 40% Cycle-Time Gain with Direct-Impingement Ovens
So, we’re talking about manufacturing efficiency, specifically how to speed things up. A big part of that is the equipment you use, and ovens are
READ MORE »
Retrofit or Replace? Paint Finishing Equipment Upgrades That Cut Downtime in Busy Job Shops
Running a busy job shop means every minute counts. When your paint finishing equipment goes down, so does your productivity and your bottom line. Upgrading
READ MORE »
Step Inside the Future: Explore GAT Systems with Our 360° Virtual Reality Tour
At GAT Finishing Systems, innovation isn’t just a buzzword – it’s the foundation of everything we do. We’re thrilled to announce a groundbreaking leap in
READ MORE »
Choosing Between 3-Stage and 5-Stage Pretreatment Washers Cost vs. Performance
So, you’re looking into powder coating and trying to figure out the whole pretreatment washer thing. It can get a little confusing with all the
READ MORE »
Convection Ovens vs. Infrared Ovens: Which Cure Technology Fits Your Parts
Deciding between a convection oven and an infrared oven for your parts can feel like a big choice. Both technologies get the job done, but
READ MORE »
PLC Controls & Automation: Building an IIoT-Ready Finishing Line from Day One
In today’s high-mix, just-in-time manufacturing environment, a finishing line can no longer operate in isolation. Engineers and plant managers are under increasing pressure to connect,
READ MORE »
Overhead Conveyor Systems: 5 Layout Mistakes That Kill Line Speed (and How to Avoid Them)
When a powder-coat or paint line struggles to hit daily quota, most engineers look first at washers, booths or ovens. Yet the silent speed-killer is
READ MORE »
Inside the Polypropylene Washer: Why Plastic Housings Beat Stainless for Pretreatment
When you’re looking at equipment for industrial pretreatment, like parts washers, you might think stainless steel is the only way to go. It’s tough, right?
READ MORE »
Powder Coating Equipment Checklist: 12 Must-Have Components for a Flawless Finish
Getting the Perfect Powder Coating Finish Starts with the Right System—And the Right Partner At GAT Systems, we do more than just supply equipment—we design
READ MORE »
Bringing Your Finishing Line In-House: The ROI Case for Custom vs. Off-the-Shelf Equipment
So, you’re a manufacturer, right? And you’re trying to figure out if you should stick with the usual, off-the-shelf equipment or go all-in on something
READ MORE »
Industrial Finishing Systems 101: How Each Module Works Together for Maximum Throughput
Industrial Finishing Systems are pretty important in manufacturing. They help make sure products look good and last a long time. It’s not just about painting;
READ MORE »
Testrite Visual Takes Control: Bringing Powder Coating In-House
In the mid-1990s, a pivotal meeting occurred between Larry Rubin, grandson of Testrite founder Herman Neuwirth, and Dan Guirl, grandson of GAT Systems founder Howard
READ MORE »
Is Powder Coating More Durable Than Liquid Paint?
Is powder coating more durable than liquid paint? What type of durability are we talking about here? We’ll answer these questions and more in this blog post.
READ MORE »
What Are The Benefits Of Converting From Liquid Paint to Powder Coating
Powder coating is considered more durable than wet paint, safer for the environment and the workers, and less prone to fading.
READ MORE »Why Is Powder Coating Better Than Liquid Painting?
There are two primary methods for finishing metal – wet painting and powder coating. Both have their pros and cons, but the industry has been leaning towards powder for quite some time now.
READ MORE »
The Guide To Converting from Liquid Paint to Powder Coating
Powder coating has been around since the 1950s, but only lately has it gained recognition as a finishing process that stands out in durability and ease of use.
READ MORE »
GAT Innovation on Display at Affordable Interior Systems
Collaborating with customers and suppliers to find innovative solutions in powder coating operations is the driving force behind the success of our company.
READ MORE »